Mobile Electronics Magazine

Switch to desktop

August 29, 2018 -- NAV-TV is proud to announce the new Front View Camera integration for all F-Series Trucks from 2013 & UP equipped with the 8-inch screen SYNC 2 & SYNC 3.

The new MFT-FCAM is a plug and play kit that can trigger the camera on the factory LCD screen by pushing and holding factory buttons on the steering controls for couple of seconds.

Compatibility Vehicles:

2013-2019: F-150 / F-250 / F-350 / F-450 / F-550

Force Factory Rear Camera feature is not available on 2015 & UP F-Series trucks.

For more information about any of our products, feel free to contact our sales department at 866-477-3336 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it..

10-12-2016 -- The PCM4-CAM Kit provides a backup camera input (with Dynamic moving parking lines) and 1 additional video input, that can be used for front view camera or any other composite video source. The PCM4-CAM is compatible with the factory media screen in the 2017 Porsche vehicles equipped with PCM4 system.

For more information on PCM4-CAM kit or any of our existing line of over 750 other integration and safety products, please contact your NAV-TV sales representative at  (866) 477-336 or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it..

11/29/2016 - Coral Springs, Florida -- NAV-TV, a manufacturer of OEM integration and safety products for the automotive aftermarket, announces the release of the Bentley HUR V1. The Bentley HUR (head unit replacement) V1 is a complete radio replacement solution for 2004 – 2011 Bentley Continental, GT, GTC and Flying Spur vehicles, allowing the installation of an aftermarket double-din radio while maintaining all factory features.   

The Bentley HUR V1 is 100% plug-and-play and includes everything needed to replace an outdated or defective factory Bentley radio. It digitally interfaces with the factory amplifier to ensure premium Bentley sound quality while requiring no rewiring, expensive custom labor or additional aftermarket equipment. The front fascia of the Bentley HUR V1, with its easy to read display and ergonomically pleasing controls, retains all the convenience and HVAC functions that were once controlled by the factory radio. Furthermore, the included steering wheel control for Alpine, JVC and Kenwood radios ensures safe operation of the radio without taking eyes off the road or hands off the wheel. A video of the Bentley HUR V1 may be viewed at https://www.youtube.com/watch?v=9wop8WOPEHs or https://navtv.com/products/NTV-KIT783/bentley-hur.html.

Pre orders are currently being accepted for the Bentley HUR V1 (SKU# NTV-KIT783) which will begin shipping on December 12th, 2016. For more information on the Bentley HUR V1 radio replacement kit, or our existing line of over 780 other integration and safety products, please contact your NAV-TV sales representative at  (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

3-22-2017 -- NAV-TV announced the release of the BMW-EVO, a rear view camera interface for all 2016 and up BMW vehicles with the new super-high-resolution, non-touch screen, NBT EVO iDrive 5.0 infotainment system.

The BMW-EVO allows the integration and display of a rear view camera and additional video source into the factory iDrive 5.0 monitor. Dynamic parking lines that move in direct reference to the steering wheel position are standard and ensure trouble free parking assistance, even in the tightest of spots. For ease of installation, the unit is 100% plug-and-play, requiring no modification to the vehicle wiring. The included additional input can be user defined and setup for automatic activation, on demand activation or timed.

To ensure flexibility, the BMW-EVO can be used in vehicles with or without a factory rear view camera in order to expand video safety integration options. Coupled with the optional NAV-TV SVS6 smart digital switcher, the BMW-EVO can incorporate up to six additional safety camera inputs including, but not limited to, side view, front, night vision, baby camera, caravan camera, cargo camera or 360 degree camera systems.

Pre-orders are currently being accepted for the BMW-EVO (SKU# NTV-KIT804) which will begin shipping on March 23rd. 2017. For more information on the BMW-EVO, or our existing line of over 800 other integration and safety products, please contact your NAV-TV sales representative at  (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

07/19/2017 - Coral Springs, Florida -- NAV-TV Corp. has announced the release of the M.O.S.T HUR 31. The M.O.S.T HUR (head unit replacement) 31 is a M.O.S.T. fiber optic radio replacement interface that allows for the seamless installation of an aftermarket radio into select 2010 to 2016 Porsche vehicles.

The Interface is 100% plug-and-play and maintains all factory features, including fade, balance, gain, bass, treble and surround sound features.*1 It digitally interfaces with the factory amplifier to ensure premium Porsche sound quality and functionality while requiring no rewiring or additional aftermarket equipment.*2 Setup of the interface requires no computers or special equipment and all setting and adjustments are displayed on the factory dash cluster. Furthermore, the included steering wheel control feature for Alpine, JVC, Kenwood, Pioneer and Sony radios ensures safe operation of the radio without taking your eyes off the road or your hands off the wheel.

Current supported compatibility as of 07/18/2017 for the MOST HUR 31 is:

2011-2016 Porsche Cayenne with a factory MOST fiber optic amplifier and either a CDR31 or PCM3.1 radio

2012.5-2016 Porsche 911 (991) with a factory MOST fiber optic amplifier and either a CDR31 or PCM3.1 radio

Future compatibility for 2010-2016 Panamera, 2014-2016 Macan, and the 2012.5-2016 Boxster and Cayman will be announced shortly.

The M.O.S.T HUR 31 (SKU# NTV-KIT835) is currently shipping and available. Product images and installation manuals may be viewed at https://navtv.com/products/NTV-KIT835/most-hur-31.html   For more information on the M.O.S.T HUR 31 radio replacement kit, or our existing line of over 800 other integration and safety products, please contact your NAV-TV sales representative at  (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

Coral Springs, Fla. & Costa Mesa, Calif. -- December 3, 2019 – NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket has announced the appointment of  Belair & Associates as Factory Representatives for the Southern California Territory.

“Michael Belair and Russ Brayall have been closely associated with the NAV-TV brand on both the retail and distribution side for years. Their technical aptitude and firsthand experience with our product line will enable them to properly service NAV-TV dealers in and around the Southern California market.  We are pleased to have Belair & Associates on board,” stated NAV-TV Vice President, Derek Schmiedl.

“We are excited at the opportunity to work with NAV-TV. With the complexity of vehicles today, having a partner in NAV-TV gives our customers the opportunity to be able to say YES to integration from audio, to back up camera systems, and even to the protection of your vehicle. Having them along with our other vendor partners gives us an opportunity to deliver a complete solution from an integration standpoint, which is a big focus for our company, and with what is happening in our industry today,” stated Rep Principal, Michael Belair.

Belair & Associates began representing NAV-TV in Southern California on December 1, 2019. For more information, Belair & Associates may be reached at 714-376-6231, or via email at This email address is being protected from spambots. You need JavaScript enabled to view it..

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it..

This email address is being protected from spambots. You need JavaScript enabled to view it.">Belair & Associates represents quality brands including Blam, Berke Marketing, Brax, Helix, HushMat, Kingpin University, Match, NAV-TV and Stinger in Southern California. 

February 4, 2020 – Coral Springs, Florida and Concord, Ontario, Canada -- NAV-TV Corp®, the global leader in vehicle integration technology who manufactures and distributes premium automotive safety, entertainment and convenience products, has appointed GemSen Distribution, Canada’s leading distributor of 12 Volt and Hi-Fi home electronics, as its Master Distributor for Canada.

Dave Singh, GemSen’s National Sales Manager – Mobile Division said, “We’re thrilled to have NAV-TV join our family of premium brands. Their innovative team is obsessed with offering high-quality solutions that close the gap many retailers face when integrating into today’s complex vehicles. Whether it’s feedback from an online forum or word of mouth, NAV-TV has earned a reputation for offering unique, reliable solutions that work, all backed by knowledgeable support and unsurpassed quality you won’t find elsewhere.

NAV-TV offers over 950 different products in categories ranging from rear view, side view, front view and night vision camera systems integration, to video entertainment, navigation, Zen Audio digital audio preamplifiers and Bluetooth hands-free and streaming. NAV-TV proudly designs, engineers and manufactures over 90 percent of all products in Coral Springs, Florida, USA.

“We are very excited to have GemSen representing the NAV-TV brand in Canada. They came highly recommended by dealers within the territory due to their support, professionalism, and technical abilities. We are confident that GemSen will provide excellent service and value to our Canadian customers,” stated NAV-TV Vice President, Derek Schmiedl.

Please contact GemSen for pricing and availability at or 905-660-3110.

Gemsen 12 Volt is a division of Gemsen representing Atrend, AudioControl, Boss Audio, Clarion, Dynaudio, Dynamat, JL Audio, Kicker, Morel, MTI Acoustics, NAV-TV and Planet Audio.

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it..

Coral Springs, FL (10.27.2017) – NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, has announced the appointment of Paragon Sales & Marketing as Factory Reps for the territory of Southern California and Hawaii.

“We are very excited to have Paragon Sales & Marketing representing the NAV-TV brand. Their firm came highly recommended from dealers within the territory due to their professionalism, uncompromising support and technical aptitude. We are confident that Wayne and his team will provide excellent service and value to our customers,” stated NAV-TV Vice President, Derek Schmiedl.

“NAV-TV is a good fit for Paragon Sales & Marketing and compliments the premium brands we represent. As “hands-on field reps” we see first-hand the challenges our dealers are faced with when dealing with complex modern vehicle electronics. We are excited to be working with NAV-TV in order to provide the best integration solutions possible that allow our clients to succeed,” stated Paragon Sales & Marketing Rep Principal, Wayne Smedile.

Paragon Sales & Marketing will begin representing NAV-TV in Southern California and Hawaii on November 1, 2017. For more information, or to contact Paragon Sales & Marketing, please email them at This email address is being protected from spambots. You need JavaScript enabled to view it..

Coral Springs, FL (03.01.2017) – NAV-TV Corp. has announced the appointment of Reliable Product Marketing as Factory Reps for the territory of Northern California and Northern Nevada.

“We are very excited to work with Reliable Product Marketing. Their proven history of “hands on” dealer support, combined with an extensive technical background, makes them the ideal partner to represent the NAV-TV brand,” stated Derek Schmiedl of NAV-TV. 

Reliable Product Marketing was formed by Scott Baughman in 2009 and has won many awards, including Rep of the Year from ARC Audio in 2013 & 2015, ORCA’s most improved territory in 2016 and Compustar’s most improved territory in 2013. In 2014, Mr. Baughman expanded RPM and founded the OEM Integration Academy to provide technical training. Backed by Ken Ward from Educar Training and key technical personnel from Compustar and ARC Audio, OEM Integration Academy’s focus is to provide territory dealers with the tools and knowledge to successfully integrate Audio, Video, Safety and Security products into complex, and often misunderstood, modern vehicles. 

08/04/2016 - Coral Springs, Florida -- NAV-TV Corp., a leading manufacturer of OEM integration and safety  products for the automotive aftermarket, announces the release of the FORD 4" UNI CAM "KT2" Rear View Camera and Video input safety interface for ALL current model Ford and Lincoln vehicles with a 4-inch color monitor. The KT2 is capable of activating a rear view camera input in one, or multiple vehicles, utilizing the same hardware. In addition, it is being launched at a 25 percent lower dealer price point versus any single-use solution on the market.

In a single use application, the KT2 enables an aftermarket rear view camera to be displayed on the factory 4-inch monitor automatically while in reverse. It also expands the capability of the factory color monitor to add an extra video input and enables viewing of the rear view camera in any gear. For multi-vehicle use, the KT2 enables rear view camera integration only. The unit comes pre-programmed with a single use and can be reloaded via a pay-per-use downloadable license file available in single, 5, 10, 25, 50 or 100 activations. Additional Activation License files are immediately available upon purchase, eliminating shipping time and costs. Each KT2 hardware interface is capable of activating a rear view camera in 768 different vehicles before it has to be replaced.

The FORD 4" UNI CAM "KT2"  interface is available and shipping now exclusively through NAV-TV and Automobility Distribution in Canada . For information on the KT2 rear view camera and video input solution, or the company's existing line of over 750 other integration and safety products, contact your NAV-TV sales representative at  (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

NAV-TV Corp.will extend sales and support hours for Authorized NAV-TV dealers, effective immediately. NAV-TV's Sales and Support department is now available to Authorized NAV-TV dealers from 9am to 9pm EST, Monday through Friday, at 1-866-477-3336 (toll free USA and Canada) or 1-561-955-9770 (Internationally).

Spearheading the newly expanded hours of operation, NAV-TV has promoted Jay Kent to Director of Sales for Western Operations. In his new role, Kent will be managing all Dealer support and account maintenance during the extended business hours.

Jay is a 25 year industry veteran that has previously held posts in research and development with Fujitsu Ten/Eclipse, technical support with Powerbass, sales and installation consultant with JTech and has been a Territory Sales Manager with NAV-TV for the last 22 months.

NAV-TV has announced the release of the GMK-PRG. The GMK-PRG is a rear view camera* and additional video input integration solution for ALL 2013 and up Chevrolet Sonic and Spark, and the 2015 and up Chevrolet Trax.

The GMK-PRG joins the NAV-TV CTS-GVIF and  MyCUE interfaces, giving NAV-TV blanket safety integration coverage of ALL of the current Chevrolet, Cadillac, and GMC lineup. No dealership coding is required. The unit is 100% plug-and-play and will not affect the vehicle electrical warranty. For convenience, the GMK-PRG also provides two 12 volt+ outputs to power the aftermarket cameras. 

The rear view camera image is automatically displayed on the factory LCD screen whenever the vehicle is placed into reverse, and can be "forced on" and viewed in any gear through analog trigger activation. The additional included video input can be activated in any gear to incorporate optional equipment such as a front view camera, FLIR night vision, side view and 360 degree view camera systems, game consoles or any other external video source with a composite video output.  Multiple analog activation triggers means the GMK-PRG can also be used in conjunction with the NAV-TV SVS-6 Smart Camera Switch (NTV-KIT592) to incorporate up to 6 camera or video sources.*

The GMK-PRG is compatible with the following Chevrolet vehicles with full color LCD display:

2013 and up Chevrolet Sonic

2013 and up Chevrolet Spark

2015 and up Chevrolet Trax

The GMK-PRG (SKU# NTV-KIT626) is available and shipping now with an MSRP of $299. A demonstration video of the GMK-PRG may be viewed at https://youtu.be/1ui2Tw1WZr0. For more details and information regarding the GMK-PRG, or for information on our existing line of over 600 other integration and safety products, please call NAV-TV at (866) 477-3336 (USA and Canada toll free), (561) 955-9770 (International) or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

* Cameras or optional video sources not included. Cameras are available and must be ordered separately 

Coral Springs, FL - 8.11.2016 -- NAV-TV Corp., a global leader in Automotive OEM integration, announces the release of the M.O.S.T  HUR MB V2 head unit replacement interface for M.O.S.T fiber-optic equipped Mercedes Benz® ML, GL & R vehicles.

The M.O.S.T  HUR MB V2  from NAV-TV™ is a M.O.S.T. fiber-optic head unit replacement module for select Mercedes Benz® ML, GL & R vehicles that allows the factory radio to be replaced with an aftermarket head unit.  The installation is plug-and-play, requiring no modification to the vehicle, and retains the factory M.O.S.T amplifier, sound quality, speakers and steering wheel controls.A European to Motorola AM/FM antenna adapter is included with the kit and vehicle-specific dash kits are available for purchase.

"Since the release of our “OPTI-1” MOST head unit replacement interfaces for Mercedes S, SL, CL, CLS and E class three years ago, our sales staff have received over a dozen requests per day for an ML, GL & R solution. These factory radios are beginning to fail due to age, don’t have attractive features like Android Auto or Apple Car Play and a factory replacement can exceed $4,000.00. In some cases that is over 40% of the total value of the vehicle,” stated NAV-TV Vice President, Derek Schmiedl.  “Replacing the radio in the past required a complete re-wire of the vehicle to bypass the factory amplifier. This was time consuming, expensive and unfortunately eliminated the sound quality of the factory premium amplified system. Needless to say, many customers were less than pleased with the results. With the M.O.S.T  HUR MB V2 , Mercedes Benz® ML, GL or R Class owners now have a cost-effective and seamless integration option to retain the sound quality of their factory sound system while adding the  benefits and features of an aftermarket radio."

Setup of the interface does not require a computer and is done through the vehicle instrument cluster and steering wheel controls. Users have the ability of adjusting Gain, Bass, Treble, Balance, Fade and Logic 7 at will. To help ensure safe operation behind the wheel, the M.O.S.T  HUR MB V2  has a built-in steering wheel control interface which allows volume, track, Bluetooth and other radio functions to be controlled without taking your hands off the wheel or eyes off the road.* A video demonstration of the installation, features, setup and compatibility of the M.O.S.T  HUR MB V2 may be viewed at https://www.youtube.com/watch?v=TtXhOBiDav8.

The M.O.S.T  HUR MB V2 is compatible with the following Mercedes Benz vehicles with a factory MOST fiber optic amplifier:


2006-2008 ML

2006-2008 GL

2006-2008 R

The M.O.S.T  HUR MB V2 is available and shipping now. 

NAV-TV Corp. has released Streamstick, the first personal and portable audiophile-quality Bluetooth audio streaming device for universal applications.

Streamstick is extremely compact, often being compared in physical description to a thumb drive, so it can be used in every situation where you may need streaming audio. 

Utilizing Bluetooth 4.0 with EDR (extended data rate), and a bandwidth of up to 3Mbps, StreamStick can seamlessly play lossless and FLAC files with incredible sound quality, rivaling that of most quality cables but all done wirelessly. With a frequency response of 5hz-44kHz, and a signal-to-noise radio of 96dB, the StreamStick will provide a true audiophile listening experience. 

StreamStick is powered by any USB port (like the back of your TV or the dash of your car), and delivers audio through a 3.5mm auxiliary jack, this device is universal, and portable. This means you can go from the car, boat, side by side to the house/office with one device.  Once an audio source is stored, the StreamStick will auto-pair with most devices. StreamStick will remember up to 8 sources, so it can be used by everyone in the family.  

NAV-TV Releases Rear View Camera Interfaces for Current Buick, Cadillac, Chevrolet and GMC vehicles that is Capable of Activating a Rear View Camera Input on 768 different vehicles

NAV-TV Corp.,has announced the release of the "GM IO" line of Rear View Camera and Video input safety interfaces for current model Buick, Cadillac, Chevrolet and GMC vehicles with either a 4.2" or 8.4" color monitor.

The GM IO line is a tiered product, capable of either activating a Rear View camera input or expanding the capability of the factory color monitor to add an extra video input. For rear view camera activation, the GM IO hardware interfaces are reusable after the initial single, included, activation is used via a pay-per-use downloadable activation file available in single use, 5, 10, 25, 50 or 100 activations.

"Each GM IO hardware interface is capable of activating a rear view camera in 768 different vehicles before it has to be replaced. Since each activation software license is substantially less expensive than the hardware and software combined, and the activation files are immediately available to the NAV-TV dealer without shipping time and costs, we are able to deliver immediate solutions to our dealers at a fraction of the cost of traditional safety interfaces," stated NAV-TV Product Development Engineer, Jack Randall.

Unlike factory GM Dealer programming that requires approximately 3 hours to activate a rear view camera input, the GM IO interfaces require no dealer coding and activates the rear view camera input in under 5 minutes.  At an average shop rate of $120/hour, activation of a rear view camera input via the dealer costs approximately $360.00 plus the installation of the rear view camera.

At a MAP price of $299 for both the hardware and single activation, the GM IO interfaces are less expensive than the dealer coding option and can be done in a fraction of the time. For dealers, that means that 3 cars can be programmed with the GM IO and the rear view camera can be installed in less time than the GM dealer can code one vehicle. 

Additionally, the GM IO interfaces, including a single software use, are priced at a dealer sheet cost of 33% less than any competing product on the market and are 100% Made in the USA. To further increase dealer profits, pay-per-use activation files start at a MAP price of $249.

To ensure GM IO compatibility, the vehicle must be qualified by the presence of RPO code IO3, IO4, IO5 or IO6. RPO codes can be found on a white sticker located in the glove box on trucks and SUV's or near the spare tire on passenger cars.

All GM IO interfaces activate a rear view camera input which appears automatically on the factory color monitor whenever the vehicle is placed into reverse. All vehicles with RPO code IO4, IO5 and IO6 will include user-selectable dynamic parking lines that move in relation to the steering wheel position while the rear view camera is displayed. Although some IO3 vehicles may have this feature, it is less common and the dynamic parking line feature is not supported or guaranteed to function.

The GM IO interfaces are available in the following configurations:

1) GM-IO3-PRG (SKU# NTV-KIT627)

Compatible with vehicles with a 4.2" color monitor, RPO code IO3 and no factory rear view camera.

Features:

  • Activates Rear View Camera input
  • Rear View Camera is shown automatically while in reverse
  • Allows the rear view camera to be turned on in any gear
  • Adds an additional video input that can be activated in any gear or speed except reverse.

2) GM-IOH-PRG (SKU# NTV-KIT628)

Compatible with vehicles with a 4.2" or 8.4" color monitor, RPO code IO4 or IO5 or IO6 and no factory rear view camera.

Features:

  • Activates Rear View Camera input
  • Rear View Camera is shown automatically while in reverse
  • Includes User-Selectable Dynamic Moving Parking Lines**

3) GM-UNI-CAM (SKU# NTV-KIT629)

Compatible with vehicles with a 4.2" or 8.4" color monitor, RPO code IO4 or IO5 or IO6 and either a factory rear view camera or GM-IOH-PRG and aftermarket camera.

Features:

  • Allows the aftermarket rear view camera to be turned on in any gear. Vehicles with factory rear view cameras must power the factory camera with a 12 volt accessory for this feature to be functional.
  • Adds an additional video input that can be activated in any gear or speed except reverse.

4) GM-IOH-PKG (SKU# NTV-KIT630)

Compatible with vehicles with a 4.2" or 8.4" color monitor, RPO code IO4 or IO5 or IO6 and no factory rear view camera.

Features:

  • Activates Rear View Camera input
  • Rear View Camera is shown automatically while in reverse
  • Includes User-Selectable Dynamic Moving Parking Lines**
  • Allows the aftermarket rear view camera to be turned on in any gear
  • Adds an additional video input that can be activated in any gear or speed except reverse.

All versions of the GM-IO interfaces are available and shipping now. For information on the GM-IO rear view camera and video input solutions, or our existing line of over 700 other integration and safety products, please contact your NAV-TV sales representative at  (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

* Cameras or optional video sources not included. Cameras are available and must be ordered separately 

** Dynamic parking lines are a factory GM function controlled by the OEM HMI unit. The NAV-TV GM IO interface does not turn on or off the factory Dynamic parking lines. Units that may fail to display the option of Dynamic parking lines must have an OEM HMI/Radio update performed by the GM dealer. 

 Coral Springs, FL – 5/30/2017 -- NAV-TV Corp. is now shipping a point of sale display for Blackvue Wi-Fi cameras. The informative color display comes complete with a non functional two channel Wi-Fi camera body and can either be displayed on a counter top or hung on a display board.

To complement the popular Blackvue Wi-Fi camera systems, NAV-TV has also introduced four new affordable Blackvue models in both two channel and single channel configurations. These new models incorporate the performance, reliability and build quality expected from Blackvue, at an extremely attractive price point.

The new models are:

DR470-2CH

Includes GPS and 16 GB memory (up-gradable to 128 GB)

Full HD 1080P front and rear cameras

Built-in Impact and Motion Sensor

Intelligent Parking Mode Monitoring

Retail: $235.00 USD

DR430-2CH

Includes GPS and 16 GB memory (up-gradable to 128 GB)

HD 720P front and rear cameras

Built-in Impact and Motion Sensor

Intelligent Parking Mode Monitoring

Retail: $210.00 USD

DR490L-2CH

16 GB memory included (up-gradable to 128 GB)

Full HD 1080P front and rear cameras

Front Sony STARVIS image sensor for improved low light recording

Included Lane Departure Warning System

3.5” touch screen for both setup and video playback

Optional GPS antenna

Built-in Impact and Motion Sensor

Native Parking Mode Support with smart vehicle battery monitoring standard

Retail: $229.00 USD

DR450-1CH

16 GB memory included (up-gradable to 128 GB)

Full HD 1080P front camera

Built-in Impact and Motion Sensor

Optional GPS antenna

Intelligent Parking Mode Monitoring

Retail: $120.00 USD

All new Blackvue dash cameras, displays and accessories are available and shipping now from NAV-TV’s Coral Springs, Florida and Salt Lake City, Utah warehouses. Additionally, all Blackvue camera sales are eligible for NAV-TV dealer program incentives.

A complete listing of all Blackvue products is available at NAV-TV’s website. For information on Blackvue Dash Cameras, Blackvue point of sale display programs, or our existing line of over 800 other integration and safety products, please contact your NAV-TV sales representative at  (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

November 9, 2018 - Coral Springs, Fla. -- NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, announces that they will maintain current Dealer, MAP and Retail pricing through 2019.

“We have carefully assessed the impact that the new tariffs will have on NAV-TV products and, although component costs have been affected, we have decided that, short of a global financial crisis, to maintain all current Dealer, Retail and MAP pricing through 2019,” stated NAV-TV CEO Moni Melman.

NAV-TV currently offers over 900 different aftermarket automotive integration products, of which approximately 90 percent are built in the USA on their SMT production lines. Ahead of the new tariff announcement, NAV-TV and their solely-owned in-house contract manufacturing division, Federal Electron, heavily invested in two additional state-of-the-art SMT production lines, increasing manufacturing throughput by over 40 percent.  

“We have spoken with numerous 12-volt companies that are faced with either increasing prices as a result of the new tariffs or absorbing the additional costs. Although we cannot compensate for the tariff impacted rising costs of materials and components, we are pleased to offer competitive, high-quality contract manufacturing services to companies looking to move electronic PCB manufacturing back to the USA. NAV-TV has reinvested in our manufacturing capabilities year-after-year, we have the manufacturing capability, experience, personnel and bandwidth, and are in a position to assist other US based companies in their time of need and beyond,” Melman said.

For more information on NAV-TV’s pricing policies through 2019, or to contact us for a contract manufacturing consultation, please contact your NAV-TV sales representative at  (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it..

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at NAVTV.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it..

NAV-TV Corp. has announced the opening of a new warehouse in Salt Lake City, Utah. The Salt Lake City warehouse will serve as a hub for product distribution for authorized NAV-TV dealers, drastically reducing shipping time to West Coast, Central and Mid West accounts.

Shipping hours have been extended as a result of the new warehouse and all orders received by 7 PM EST (8 PM EST for Overnight shipments) will be shipped the same day.

"The additional Utah warehouse and extended shipping hours are important steps to improving our position and efficiency in the US market. NAV-TV is committed to further streamlining our product availability and dealer delivery networks while aggressively developing new and revolutionary products. We are pleased to announce this next step in our plan for continued growth and support of our dealer base," stated NAV-TV CEO, Moni Melman. 

For more details and information on the new NAV-TV Salt Lake City warehouse, or for information on our existing line of over 700 integration and safety products, please call NAV-TV at (866) 477-3336 (USA and Canada toll free), (561) 955-9770 (International) or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety  products for the automotive aftermarket, announces they have won a final judgment for permanent injunctive relief in a patent infringement lawsuit against Car Integration Systems Corp and Rich DeSclafani. Case number 14-CV-62390-PCH, filed in the United States District Court for the Southern District of Florida, ordered that judgment is entered in favor of the Plaintiff, NAV-TV Corp., and against defendants, Richard DeSclafani and Car Integration Systems Corp. as follows:

1 . Permanent Injunctive Relief.

Defendants, their officers, agents, servants, employees, attorneys, all parent and subsidiary corporations and affiliates, their assigns and successors in interest, and those persons in active concert or participation with any of them are hereby permanently restrained and enjoined from:

a) making, using, manufacturing or causing to be manufactured, importing, advertising, promoting, distributing, selling or offering to sell goods which practice any claims of Plaintiff s United States Patent Nos. 7,917,261 ("the 261 Patent") and 8,103,407 ("the 407 Patent'') (collectively, the "patents-in-suit''), including but not limited to UNi-VIM /CAM , and inducing others to participate in these ads in any manner;

b) using the patents-in-suit in connection with the sale of any unauthorized goods;

c) using the patents-in-suit in any manner which is calculated to suggest that products of Defendants offered for sale are being sponsored by, authorized by, endorsed by, or in any way associated with Plaintiff,

d) falsely representing themselves as being connected with Plaintiff, through sponsorship or association;

e) engaging in any act which is likely to falsely cause members of the trade and/or of the purchasing public to believe any goods or services of Defendants offered for sale are in any way endorsed by, approved by, and/or associated with Plaintiff;

t) using the patents-in-suit in connection with the publicity, promotion, sale, or advertising of any goods sold by Defendants,

g) Appropriating or using the patents-in-suit in connection with the sale of any goods by Defendants, as being those of Plaintiff or in any way endorsed by Plaintiff;

h) otherwise unfairly competing with Plaintiff, and

i) effecting assignments or transfers, forming new entities or associations or utilizing any other device for the purpose of circumventing or otherwise avoiding the prohibitions set forth above.

2. The Court retains jurisdiction to enforce this Judgment and Permanent Injunction.

3. This Clerk of Court is directed to CLOSE the case. Any pending motions are DENIED as moot.

All inquiries regarding this judgment, or for information on obtaining NAV-TV patent or trademark licensing, must be made in writing to NAV-TV Corp., 3950 NW120th Ave, Coral Springs, FL 33065 or by telephone at (866) 477-3336. 

Coral Springs, Fla. -- October 29, 2019 -- NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, announces the ZEN-AVB-GM preamplifier. The ZEN-AVB-GM is the newest addition to the competition- proven ZEN Audio family of digital preamplifiers and is the first aftermarket automotive product utilizing AVB.

The ZEN-AVB-GM is compatible with 2017 to 2020 Cadillac, Chevrolet and GM vehicles equipped with AVB infotainment radios IOT (8” with navigation) or IOS (8” without navigation) and Bose®. The preamplifier produces a completely flat audio output without any factory time delay or equalization, eliminating the need for summing devices, an audio correction DSP or the removal of the factory audio compensation microphones. Volume, Fade [1] and Balance are supported through the factory radio and steering wheel controls.

Utilizing a 128 bit per channel floating point DSP and 192 kHz 32 bit TI (Burr-Brown) DAC, the ZEN-AVB-GM produces a 6 channel analog output (Front L/R, Rear L/R, Sub and Center) with a peak voltage of 6.3V and a S/N Ratio of 112dB. All warning chimes and audible turn signal indications are attenuated to factory levels and, along with Onstar®, Navigation prompts and Bluetooth, are passed to the front output channels [2], eliminating the need for an external speaker. The unit provides a 500mA output for controlling aftermarket devices and, additionally, retains the factory three band equalizer (high, mid and bass).

For use with third party digital sound processors [3], the ZEN-AVB-GM includes a variable Toslink (optical) digital output which may be used simultaneously with the analog outputs, or by itself. The variable digital output allows for the system volume to be controlled via the factory radio and steering wheel controls without the need to access any third party controller.

For ease of use, the ZEN-AVB-GM is configurable through dip switch settings. User selectable features of the ZEN-AVB-GM are: 

·        Factory Bass control becomes a Subwoofer Level Controller or Controls Bass for the entire system (Analog output only) – eliminates the need for a sub control knob!
·        Loudness control for extended bass response at low levels or loudness off (Analog output only)
·        Selectable output level: 0dB or -6dB. Digital Output at 24 bit 48 kHz.

In order to make the Zen Audio compatibility process simple for General Motors vehicles, NAV-TV has produced a short video that will help qualify the vehicle infotainment system to ensure compatibility using a QR code reader. Vehicles with infotainment options IOT or IOS and Bose utilize the ZEN-AVB-GM and those with infotainment options IO4, IO5 or IO6 and Bose utilize the M650-GM. The video may be viewed at https://youtu.be/YMHfpRytPho.

Pre-orders of the ZEN-AVB-GM (sku# NTV-KIT955) are being accepted starting October 29th, 2019 and will begin shipping on November 4th, 2019 with a retail price of $599.00 USD.

For more information on the ZEN-AVB-GM, or our existing line of over 950 other integration and safety products, please contact your NAV-TV sales representative at  (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it.

[1] Fade is only supported through the analog outputs. When using the digital outputs, fade will need to be controlled via the third party product.
[2] When utilizing the analog outputs all warning chimes will be designated only to the front output. When utilizing digital outputs all chimes, etc will appear in both the front and rear channels.
[3] Please refer to the operation and installation manual of your 3rd party DSP or device, or contact the manufacturer directly. Although NAV-TV has tested numerous 3rd Party DSP devices for compatibility with the ZEN-AVB-GM, we cannot provide technical support on 3rd party products.

Copyright - Mobile Electronics Association 2020

Top Desktop version